Hs125 25l Hydroboil 3kw Stainless Steel |
Heaters |
|
|
|
|
|
|
|
 |
You are here  |
Hs125 25l Hydroboil 3kw Stainless Steel for £1,572.27 |
 |
|
|
|
|
|
|
 |
|
| |
Hs125 25l Hydroboil 3kw Stainless Steel.
HS302 25L Hydroboil 3.6kW Stainless Steel; 150 Cups at one time Capacity: 25 ltr Delivery rate: Up to 150 cups at a time
Recovery rate: Up to 180 cups/hour
Energy rating: 3.6kW Dimensions mm: 780H x 390W x 299D Heating element: Long -life incalloy sheathed embedded rod
Thermostat: Capillary type
Boiling chamber: Crevice -free stainless steel chamber with removable stainless steel access ports top and bottom Twin chamber: Steam -Heat -Boost technology
Case: Corrosion resistant; Stainless steel Insulation: Compressed high temperature insulation panels engineered
for quick access to boiling chamber ports
Classic Catering Tap: Chrome -plated brassware Two positions
Safety features: Thermal cutout integral to heating element; thermal cutout on vent tube
Approvals: WRAS Approved and CE Endorsed
Warranty: Two -years Installation: Should be installed over a draining board; or over a work top fitted with a drip tray — tap spout should be no higher than necessary to fill large pots
Minimum tap height above draining board for on -wall maintenance is 200 mm
Leave minimum clearance of 150mm above; 65mm left and 20mm right
Hanging and fixing screws supplied with wall plugs
Plumbing: Designed for direct connection to a potable cold water supply with a minimum pressure of 1 bar and a maximum pressure of 7 bar
A pressure reducing valve must be installed if water supply pressure is likely to exceed 7 bar
An isolating valve should be installed between the water supply and the heater
For concealed plumbing connections; connect inlet and vent pipes from the rear via 15 mm capillary elbows
For exposed plumbing connections; connect inlet and vent pipes from the bottom directly to 15 mm compression fittings with nuts and olives provided
Venting: The vent must discharge to a safe visible position as; under certain conditions; the vent may discharge cold or boiling water and/or steam
The vent pipe outlet must be connected via a tundish to a 15 mm Copper vent pipe whi... |
|
 |
£1,572.27 Incl VAT (EU)
£1,367.19 Excl VAT (Outside EU)
|
|
|
|
|
|
 |
Information |
 |
 |
Optimised for viewing on Internet Explorer 5 or later at 1024 X 768.
Managed by eDirectory.co.uk copyright 1997 - 2008 |
 |
|
