115ltr 3.0kw Cistern Combintation Water Heater - h 1011 w 610 d 445 mm |
Boilers & Accessories |
|
|
|
|
|
|
|
 |
You are here  |
115ltr 3.0kw Cistern Combintation Water Heater - h 1011 w 610 d 445 mm for £906.70 |
 |
|
|
|
|
|
|
 |
|
| |
115ltr 3.0kw Cistern Combintation Water Heater - h 1011 w 610 d 445 mm.
- Ideal where a number of hot water outlets are needed; such as kitchens; washrooms; schools restaurants; or offices. - ‘Twin stat’ temperature control for excellent safety; allowing the first thermostat to be set to the required temperature and the second to be set to a cut -out temperature 15.C above the first. Second ‘safety’ thermostat is also manually re -settable. - Polyurethane foam injected insulation for minimal heat loss. - Built -in feed cisterns for easy installation. Minimum height of the hot water draw -off point is 1.25m below the top edge of the unit. - Steel case for durability. - Pre -drilled cistern inlets for left or right -hand supply. - Bylaw 30 compliant. HSR 115 RATING Kw 3 CAPACITY litres 115 WEIGHT EMPTY/FULL Kg 1530/153 ELEMENT: Copper on heater plate assembly INNER CONTAINER: All copper construction/WRC approved GRP cistern. CASING: Anti -corrosion proofed powder coated steel. INSULATION: Injected polyurethane foam. THERMOSTAT: Variable thermostat with variable manual reset thermostat. BASINS 8+ SINKS/COMMERCIAL 3 STORED TEMPERATURE: 71°C (24 hour supply) Warranty: 2 years . Important Note: Type of use can vary capacity required – please consult HSD if in doubt. |
|
 |
£906.70 Incl VAT (EU)
£771.66 Excl VAT (Outside EU)
|
|
|
|
|
|
 |
Information |
 |
 |
Optimised for viewing on Internet Explorer 5 or later at 1024 X 768.
Managed by eDirectory.co.uk copyright 1997 - 2008 |
 |
|
